Fan Drive Shaft Mod

Febuary 3rd 2005

Well I couldn't handle it anymore lol,

so I made an adapter bracket out of Chrome Molly steel to strighten out our fan drive alignment.  It took me the better part of a day to complete it but I think it was worth it.

We had to cut away some of the orignal lower mount to get the shaft into center.
It could have been shifted a bit more aft but the way the bracket it's self made it wasn't possible

.

First we bead blasted the bracket, then we put a coat of self etching primer on it.

Last we finished it off with a top coat of good ole Tennessee Orenge,
Its's really Chevrolet Orenge but we aren't going to tell anyone lol.

It's still got a slight tip but nothing as bad as what we had when we started so we're pretty happy with it.

END