25 Hour Service

This is about all we have for this page at the moment

All the 25 Hour services were performed

Measure & Adjust Valve Lash & Inspect Valve Train

Also, if any initial measurement is in excess of .008", inspect the lash cap for wear & repeat valve adjustment at one hour intervals until the lash stabilizes.  If repeated excess lash is encountered, all related valve train components should be inspected.

Check spring retainer, check gap on spring keeper & check valve guide for play.

Date 6/30/01

EH  24.7 Hours

-	Measure Exhaust Valve Was	Valve Guide Play	Measure Intake Valve Was	Lash Cap	Adjusted Exhaust Valve To	Lash Cap	Adjusted Intake Valve To
Cylinder 1	.007	ok	.005	ok	.0045	ok	.0055
Cylinder 2	.008	ok	.006	ok	.005	ok	.0045
Cylinder 3	.008	ok	.008	ok	.005	ok	.005
Cylinder 4	.008	ok	.008	ok	.005	ok	.004

Check the Valve Cover Bolt O-Ring seals

 
Reinstall Valve Covers tightening the bolts 1/2 turn past
the point of the flat washer coming into contact with the valve cover.

Done 6/30/01

Page created Feb 2005

END